-
×
El Sol Distortion
1 ×$8.00$6.40 -
×
Awful Waffle
1 ×$8.00$6.40 -
×
Chop Shop Overdrive
1 ×$12.00$9.60 -
×
Desolate Fuzz
1 ×$10.00$8.00 -
×
Kliché Overdrive
1 ×$12.00$9.60
20% off all PCBs - Valid through 04/20/2024
Components and sale items excluded
The Seventh Mixolydian –
Great layout
Richard Couchman –
Works like a charm! Great high gain tones with no noise, even through a clean amp!
Tom –
Great pedal. Was my favorite dirt pedal until I found the Dirty Sanchez.
Steve (verified owner) –
Sounds fantastic! Layout is clean and easy to build.
John (verified owner) –
Sounds fantastic
DollyClonesFX –
Awesome clone of be-od circuit, high quality pcb. Thanks.
ngleon777 (verified owner) –
This is hands down one of the best sounding pedals that I have ever made. Fantastic sounding and highly recommended!
d.p.allegre (verified owner) –
Great mid to high gain tones. Very nice layout. Used a pre drilled bare enclosure from tayda that fits perfectly. Cost of the build was about a third the cost of a be od.
adamiler (verified owner) –
Killer pedal. Easy build. Great board layout.
brianthornock (verified owner) –
Works great, sounds amazing, has become my go-to high gain drive.
Angershark (verified owner) –
Got to play through the original pedal and loved it except for the price. I saw it on here and just had to build it! As far as I can remember it’s pretty close. My best build and favorite of all my pedalpcb builds.
zztothnyc (verified owner) –
The pedal is exactly what I expected: turns a clean amp into something that really closely approximates a high gain Marshall sound. Instead of trying to find the amp that has the perfect cleans and perfect distortion channel, I just decided to build this pedal and use it with my Peavey Classic 50 410. I couldn’t be happier. I’m not sure how close it is to the original pedal, but it can exactly replicate the drive channel of my first-generation Marshall Valvestate. The PCB itself is great quality and the instructions are straight forward. Like others mentioned, there is a perfectly fitting, pre-drilled Tayda box.
Rixroxx (verified owner) –
This is such a very good heavy pedal that I have been looking for. Good for 80’s sound. Sustainful. I was right when I chose this over Dirty Sanchez (just my preference). I suggest to those who will build this: I have acquired like almost a dozen of TL072. From experienced, I auditioned this chip and they are not consistent with the quality. One chip will sound different from another. I noticed some TL072 chip do not sound full and sometimes can be bit noisy. So I ended up choosing those ones that were operationally quite, fat and with good sustain. So my suggestion is if you can get a dozen of it, audition it first. I have a bare DIY TS9 circuit that I used in auditioning this chip. After doing it, these Thermionic Distortion is a bomb!
ricardorx (verified owner) –
It is an excellent marshal in a box, it responds very well to crunch and high gain tones.
Paul Barrette (verified owner) –
This pedal sounds great and is quieter than my other metal pedals. I used cloth wire throughout not sure if that makes a sonic difference. The trim on the inside will give you huge gain maybe more than you need. I have it dialled back most of the way. This is a very usable pedal. The pcb is well done no issues assembling it. I played a deluxe beod and this clone sounds pretty close in tone and maybe a bit more gain.
Pb